Our technicians carry out a comprehensive inspection that takes normally one to two hours and at the end of the inspection we will explain in detail what we have found. We test pool water for correct readings to make sure that the PH is correct and check for algae development. We recommend what chemicals are required to achieve a desired reading as it is of upmost importance the chemicals in the pool water are maintained at the desired level to stop the pool from getting green especially in the winter when it’s not in use.
We will also check the filter and pump functionality to make sure that everything works correctly. We make sure the pressure gauges for the vacuum and pump are correct and waterflow pressure is working as it should. We also do a leak detection and pressure test, but this is just preliminary to see if a full test is required. During this test we should be able to tell you if we see any signs of potential leaks and if so, we will recommend an appropriate solution.